Tuesday, October 6, 2015

Panerai Luminor 1950 3 Days Titanio DLC, 47mm Special Editions (Ref. PAM00617 & Ref. PAM00629)

Dedicated to the connoisseurs of the legendary Italian watch brand, Panerai unveils two Special Edition timepieces with a wealth of historical references, and only 300 of each have been produced.

All Panerai watches are the result of an interaction between historic elements and advanced technical solutions. The historic references speak of the identity of the brand, its Florentine origins, the excellence of Italian design in the period between the 1930s and the 1950s, and the underwater missions carried out by the commandos of the Italian Navy for whom these watches were created.
Ref. PAM00629
The first historical element of the new models is the Luminor 1950 case. There is a subtle difference between the Luminor case and the Luminor 1950 case, and naturally the origins of this distinction are to be found in the history of Officine Panerai. The number “1950” refers to the year when the case with the iconic lever device protecting the winding crown was designed; it was developed to make the watch worn by the commandos of the Italian Navy even stronger and more water-resistant. The proportions of this historic case were not reproduced by Panerai until 2002, when the first Luminor 1950 (PAM00127) was launched. This was a Special Edition faithful in every detail to the watches of the original period, and it has since become a cult object among collectors. The first models of the modern era to be fitted with the lever device (from 1993) were designed with a slightly revised design, which today identifies the Luminor collection. It can therefore be said that the Luminor case was inspired by the modern history of Panerai while the Luminor 1950 case was linked to the past history of the brand: the legendary story of the commandos and their missions.
Ref. PAM00629
The two new models have a small detail marking their link with Panerai’s history: the date “1950” is engraved on the lever locking the winding crown. The case is made of titanium – a light, strong, hypo-allergenic material – coated with DLC (Diamond-Like Carbon) and it is 47 mm in diameter, like the vintage models. The result of the interaction of all these elements is a case with a vintage design but the performance of contemporary high-end watchmaking. Emphasised by the brown leather strap with contrasting stitching, with the OP logo stamped upon it, the look is dark, sober and sporty, and is reminiscent of the depths of the sea where Panerai watches were born and in which the new models will be able to dive, since their water-resistance is guaranteed up to 10 bar (a depth of about 100 metres).
Ref. PAM00617
The two new Luminor 1950 3 days Titanio DLC differ from each other in the dial, which in both cases is protected by a rounded crystal. One version (PAM00617) has the black dial with the classic Panerai design, with large bar markers and figures, the seconds counter at 9 o’clock, the OP logo and the traditional sandwich construction. By contrast, the other model (PAM00629) has a  black dial with a combination of Roman and Arabic numerals and graphic markers; this variant is known as the California dial and is much sought-after by collectors because it reproduces the design of the first Panerai watch in history, the Radiomir of 1936.
Ref. PAM00617
The movement of the new Luminor 1950 is the P.3000 calibre, hand-wound with a power reserve of three days. The P.3000 calibre is 16½ lignes – a size typical of the vintage models – and it has a very sturdy, reliable structure, with a wide balance wheel 13.2 mm in diameter, firmly held in place by a transverse bridge. Most of the wheelwork is covered by wide, brush-finished, chamfered bridges, a finish which gives the movement a sporty yet sophisticated appearance. Entirely designed and built by the Officine Panerai Manufacture in Neuchâtel, the calibre also has the device for quickly setting the time, enabling the hour hand to move in jumps of one hour at a time, without interfering with the movement of the minute hand or the running of the watch.
Technical details
LUMINOR 1950 3 DAYS TITANIO DLC – 47mm

Ref. PAM00617
Movement: Hand-wound mechanical, P.3000 calibre, executed entirely by Panerai
Functions: Hours, minutes, small seconds
Case: 47 mm, titanium with black DLC coating
Dial: Black with luminous Arabic numerals and hour markers. Seconds at 9 o’clock
Power reserve: 72H
Water-resistance: 10 bar (~100 metres)

Ref. PAM00629
Movement: Hand-wound mechanical, P.3000 calibre, executed entirely by Panerai
Functions: Hours, minutes, small seconds
Case: 47 mm, titanium with black DLC coating
Dial: Black with luminous Arabic and Roman numerals and hour markers
Power reserve: 72H
Water-resistance: 10 bar (~100 metres)

No comments:

Post a Comment

Popular Posts

Blog Archive