Saturday, October 10, 2015

Panerai - Radiomir 1940 3 Days Acciaio, 42mm (PAM00574) & Radiomir 1940 3 Days Oro Rosso, 42mm (PAM00575)

Officine Panerai presents the new Radiomir 1940 in steel or red gold, fitted with the P.1000 calibre, hand-wound with a power reserve of three days. The new Radiomir 1940 3 Days, available in steel or red gold with a diameter of 42 mm, is an ideal choice for all enthusiasts looking for a watch with pure lines but a strong personality, versatile and suitable to every situation.
The new P.1000 calibre – entirely made in the Panerai manufacture in Neuchatel – is a very solid, reliable movement with a large brush-finished bridge covering the major part of the wheelwork and a bridge with two supports firmly holding the balance, which oscillates at a frequency of 4 Hz (28,800 vibrations per hour).
Thanks to the two spring barrels connected in series, the calibre has a long power reserve (three days), a requirement which has been part of the identity of the brand since the 1940s, when the Florentine watchmakers Panerai decided to use Angelus calibres with a power reserve of eight days for the watches supplied to the Italian Navy. Its commandos had to be able to count on an instrument with reliable timekeeping which would not be subject to wear or leaking as a result of frequent rewinding.
The new Radiomir 1940 3 Days also has the system for stopping the balance which operates in conjunction with the device for zeroing the seconds hand: when the winding crown is pulled out, the balance wheel stops and the seconds hand, rotating in the classic subsidiary dial at 9 o’clock, is moved back to zero, so that the watch can be synchronised exactly with the reference time signal. The P.1000 movement was entirely designed and produced in-house at the Panerai Manufacture in Neuchâtel.
The watchmaking technical expertise of the P.1000 calibre is contained within a diameter of just 26.8 mm (12 lignes) and a thickness of 3,85 mm, so it is perfectly suited to the proportions of the Radiomir 1940 case, which is 42 mm in diameter. The case is water-resistant to 10 bar (a depth of about 100 metres) in the polished AISI 316L stainless steel version and to 5 bar (about 50 metres) in the gold version. The latter is made of 5NPT red gold, the special gold alloy used by Panerai, which has a high percentage of copper, as well as a small amount of platinum which helps to prevent the precious metal oxidising.
The sapphire crystal of the porthole on the back of the new Radiomir 1940 3 Days enables the construction and finish of the P.1000 movement to be admired while the polished bezel frames the classic Panerai black dial, with large bar markers and figures.
The dial has the sandwich structure invented at the end of the 1930s to maximise the visibility and legibility of the markings: two superimposed discs contain the luminous substance which shines through the holes in the upper one, which correspond to the dial markings. In the steel model (PAM00574) the alligator strap is coordinated with the light green of the Super-LumiNova®, while the model in red gold (PAM00575) is supplied with a black alligator strap.

Model: RADIOMIR 1940 3 DAYS ACCIAIO – 42mm
Reference: PAM00574

  • Movement: Hand-wound mechanical, P.1000 calibre, executed entirely by Panerai
  • Functions: Hours, minutes, small seconds
  • Case: 42 mm, AISI 316L polished steel
  • Dial: Black with luminous Arabic numerals and hour markers. Seconds at 9 o’clock
  • Power reserve: 72H
  • Water-resistance: 10 bar (~100 metres)
Model: RADIOMIR 1940 3 DAYS ORO ROSSO – 42mm
Reference: PAM00575

  • Movement: Hand-wound mechanical, P.1000 calibre, executed entirely by Panerai
  • Functions: Hours, minutes, small seconds
  • Case: 42 mm, 18 ct. polished red gold
  • Dial: Black with luminous Arabic numerals and hour markers. Seconds at 9 o’clock
  • Power reserve: 72H
  • Water-resistance: 5 bar (~50 metres)

No comments:

Post a Comment

Popular Posts

Blog Archive