The new Sirius Flying Regulator from CHRONOSWISS features a “flying” minute dial and sub-dials for hours and seconds, which stand out from the guilloche base. The high-quality, slightly curved sapphire crystal further draws attention to the dial’s three- dimensionality. Inside this exquisite watch, the tried and tested manufacture calibre C.122, which already moved the legendary Régulateur Automatique, the first automatic model featuring a regulator-style dial by Chronoswiss, can be seen through the glass back.
Externally, the Flying Regulator shines with its classic stainless steel or red gold case as well as with its dial featuring the characteristic Flying Regulator signature guilloche, which has been specially designed for this line in the studios of Lucerne-based House of Chronoswiss. This guilloche pattern is made even more stunning by electroplating which enhances the dial in either silver, black or a very dark midnight blue.
Model: Sirius Flying Regulator
CH-1241.3R-SISI: 18 ct. Red gold, dial galvanic silver
CH-1241.3R-BKBK: 18 ct. Red gold, dial galvanic black
CH-1245.3-BKBK: Stainless steel, DLC coated, dial galvanic black
CH-1245.3-BKBL: Stainless steel, DLC coated, dial galvanic blue
CH-1243.3-SISI: Stainless steel, dial galvanic silver
CH-1243.3-BLBL: Stainless steel, dial galvanic blue
Off-centre hours at 12:00, central minutes, small seconds at 6:00
Solid red gold or stainless steel case, satin finish and polished, bezel with side knurling and curved, non-reflecting sapphire crystal, screw down case back with satin finish and flat sapphire crystal, onion crown, water resistance up to 3 bar, strap holders screwed down with patented Autobloc system
Dimensions: Ø 40 mm, height 12 mm
Chronoswiss manufacture calibre C.122
Diameter: Ø 26.80 mm / Ø 26.40 mm (11 ¾´´)
Height: 5.30 mm
Balance: Glucydur, three-legged
Balance spring: Nivarox I
Fine adjustment: Index via eccentric cam
Shock protection: Incabloc
Stroke rate: 3 Hz., 21,600 A/h (oscillations)
Power reserve: Approx. 45 hours
Finish: Rhodinised or gold-plated, skeletonised rotor with Geneva Stripes, ball bearing mounted; circular-grained plate; bridges with Geneva Stripes and circular-grained offsets; gold-plated engraving and jewel settings; polished lever, escape wheel and screws
Guilloche base with “flying” sub-dial floating above screwed plinths, galvanised in different colour combinations
Watch hands: Shape Poire Losange; curved and either thermally blued, gold-plated or lacquered depending on the model
Louisiana alligator leather or embossed calfskin
Co-founded by Sydney Dong and Dr Christopher Tay, Hong Kong based watch brand SD-09 presents its Spacecraft Timepiece on popular crowd fundi...
In this new rose-gold Haute Joaillerie version, the Aquanaut Luce combines the most complex jewel setting techniques (invisible and snow set...
The new KonTiki Diver watch takes inspiration from a vintage ETERNA dive watch from the 1970s. Divers at the time used “no decompression” ta...
With the Aqua series, German watch brand NOMOS Glashütte is extending the significant success of the neomatik collection . The new collec...
The new CableForce series enriches the Gc men’s line with a new design for men with a strong personality. Intricate wire details on the beze...
Gc celebrates its 20th anniversary with a limited edition timepiece for men. True to its watchmaking savoir-faire, the Gc 20th Anniversary i...
During Baselworld 2016, Paul Picot has launched the Atelier Cherry Blossom, a time piece that appeal to women who appreciate elegant lines, ...
Swiss watch brand Eterna marks the 70th anniversary of Thor Heyerdahl’s legendary KonTiki expedition with a bold new limited edition timepie...
Zahnd & Kormann watch brand was founded by Florian Kormann and Roger Zahnd in order to create high quality timepieces bearing the presti...
Carl F. Bucherer expands its popular diving watch collection, the PatraviScubaTec by launching a new variation featuring a color combination...