Sunday, March 13, 2016

Sinn1800 S Damaszener Limited Edition

Since its establishment in 1961, German watch brand Sinn focused continuously on high-quality mechanical watches combining a traditional sense of quality with advanced solutions. This has repeatedly resulted in the use of totally new watchmaking materials. In1995, the brand presented the first watch made of 22-carat yellow gold with a material hardness equal to that of stainless steel (220 HV). In 2005, German Submarine Steel was used for the first time in diving watches.

The new limited edition 1800 S model made of Damascus steel seamlessly follows on from this by rendering the highly traditional material appropriate for watch cases – without forsaking but rather enhancing its special allure. The watch thus displays a uniqueness that is immediately reflected in its design and appearance. In order to bring the characteristics textures of Damascus steel to the fore – an organic pattern of alternating bands of light and dark – the dial and central part of the case are forged from a complete steel block rather than designed as separate components, as is customary. The result is rather remarkable: for the Damascus pattern on the dial continues across the entire case to create a fascinating and impressive whole.
Thanks to the use of TEGIMENT Technology and the application of an additional Black Hard Coating, Sinn has succeeded in combining functionality with high quality. The Black Hard Coating displays the pattern in a subtle, exquisite light and ensures good readability and a masculine-looking watch.

Damascus steel has fascinated humankind for centuries. It gained its legendary reputation above all in the making of swords, knives and blades. Damascus steel is a combination of at least two different types of steel, layered to create the aforesaid surface design.
The traditional art of making Damascus steel is very elaborate and portrays a unique blend of craftsmanship and application. During production, the different types of steel are layered and forge-welded together.

The piece is then forged, halved while in a glowing state and layered together again. Experts refer to this as ‘folding’. By combining soft and hard steels, a new kind of steel is created, one which displays properties of both. In the final stage of production, the Damascus pattern is made visible through surface etching. The steels are dissolved to varying extents by acid, thus forming the typical light and dark nuances.
For the case of Sinn 1800 S DAMASZENER model, the different steels used are combined using powder metallurgy and, in this sense, technically optimised.

Also during production of the 1800 S DAMASZENER, the layered structure is made visible through final surface etching, which gives the material its characteristic appearance. Each watch thus becomes an extraordinary and unique timepiece, as the flow of lines cannot be physically manipulated.
Technical details
Model: 1800 S DAMASZENER
100-piece limited edition watch made of Damascus steel

ETA 2892-A2
Self-winding mechanism
21 bearing jewels
28,800 semi-oscillations per hour
Seconds stop function
Shock resistant as per DIN 8308
Anti-magnetic as per DIN 8309

Case with integrated dial in Damascus steel
Damascus steel case back
Sapphire crystal glass, anti-reflective on both sides
Case back screw-fastened
Crown screwable
Meet the technical requirements for waterproofness, as set out in standard DIN 8310
Pressure-resistant up to 10 bar
Low pressure resistant

Hours, minutes, seconds
Date display

SINN Technologies
Black Hard Coating on a TEGIMENT Technology basis

Dimensions and Weight
Case diameter: 43 mm
Band lug width: 22 mm

Dial and Hands
Dial in Damascus steel
Indices made of 13 meticulously appliqués
Indices coated with luminescent colour
Hour and minute hand coated with luminescent colour

2 years

No comments:

Post a Comment

Top Posts of This Month

All Time Popular Posts